Netgear Extender LED Not Turning Green? Here’s the Solution!

Is the power LED light on your Netgear WiFi extender is flashing red? Well, you are not alone! It is one of the most major problems experienced by the users. If you have no idea how to fix the issue and you want a permanent solution then walk through this post. In this post, we have provided a simple solution to fix the issue. Once the issue is resolved you can easily access the login page via

Fixed: Netgear Extender LED Not Turning Green

The technique to fix the Netgear wireless range extender turning not green is pretty simple. Follow the instructions given below and resolve the problem:

Netgear Firmware Update via Nighthawk App

Before you commence, make sure that your cell phone is updated to its newest version. Along with that, it is free from viruses and fully charged. Once done, proceed further.
i. Initially, unlock your mobile device.
ii. Now, head over to the Apple App Store or Google Play Store as per your convenience.
iii. In the search bar, type Nighthawk app.
iv. From the results select the correct application and download it.
v. As soon as the app is installed, launch it.
vi. Thereafter, input the Netgear extender login details in the required fields.
vii. Now, press the Log In button.
viii. Within a couple of seconds, the Netgear Genie setup wizard will show.
ix. Here, navigate to the Settings option.
x. Tap on the Firmware Update button.
xi. Hit the “Yes” option for confirmation.

In this manner, you can upgrade the extender firmware. Now, confirm that the Netgear extender LED not turning green issue is resolved. On the off chance, you still face the power LED light not turning green issue then refer to the next section to fix the issue.

Netgear Firmware Update via Manual Method

The most common way to upgrade the Netgear wireless range firmware is using the web interface method. Walk through the instructions highlighted in this post and learn how to perform the Netgear extender firmware update.

  • First of all, place the wireless range extender into the well-working power socket.
  • After that, power on the switch and wait for some time.
  • Now, attach the extender to the home router using an Ethernet cable.
  • Once done, turn on your smart device.
  • Open an internet browser.
  • In the URL field or location bar of the browser, enter in it.
  • Hit the Enter key to proceed further.
  • Within a few seconds, the Netgear extender login window will appear.
  • Here, fill up the default username or passphrase.
  • As soon as you input it, click on the Log In button.
  • The Netgear Genie setup wizard will come into view.
  • Now, navigate to the Settings menu and click on the Administration button.
  • Right away, hit the Firmware Update option.

If the aforementioned troubleshooting hacks bear no result, then chances are that your extender has been configured partially. So, it is time to perform a factory default reset of your Netgear wireless range extender. It can be done either by pressing the Reset button. To reset your repeater, follow the steps given below:

  1. Firstly, look for the reset button in the WiFi range extender.
  2. As soon as you find it, press the button gently using a sharp pointed object such as a paper clip.
  3. Hold on for a couple of seconds.
  4. Once the LED light blinks on the extender, release the button.

After the reset process, do not forget to perform the WiFi extender setup again.

In the End

That’s it! We end our guide on how to fix the Netgear extender LED not turning green. We believe that with the help of the tips mentioned in this post, you will surely be able to fix the issue without any technical issues blocking your path. If you liked reading this article and want others to learn about what you did, do share it with your fellow readers via the comment section. Thank you for reading the post.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button